2-Pack G3 Self-Draining Pull Loop Kayak Scupper Plugs

Introducing the G3 Kayak Scupper Plugs - the ultimate scupper plug developed with expertise and innovation. Combining everything they learned since becoming the market leader in kayak scupper plugs in 2017, Kayak Scupper Plugs has created a custom-fit plug with all the features demanded by customers. The most notable improvement is the new pull-loop, allowing for easy removal while on the water. Additionally, the advanced valve design defaults to an open drain position, preventing even the smallest amounts of water from gathering. This highly responsive valve assembly is the best one yet, and all these features come at a reasonable price, surpassing previous generations.

For years KSP has been supplying custom fit kayak scupper plugs kit for most kayak makes and models. We are happy to now offer the latest in scupper plug innovation. These self-draining or self-bailing scupper plugs are designed and manufactured by Kayak Scupper Plugs. This unique plug design allows water to drain from the kayak while still preventing water from rising from below the kayak. It truly is the best of both worlds because we all know water is going to find a way into the kayak and these plugs both block and drain water in one single plug. You have to try them to believe how effective they are!

Sold in packs of two.  Each plug has a slight taper for a tight fit when installed. This is better than universal plugs with an extreme taper because those plugs tend to not hold as secure which makes them prone to leaking and becoming dislodged easily.

NOTE: IF YOU PLAN TO PICK UP THESE PLUGS IN-STORE, PLEASE PRE-ORDER PRIOR TO ARRIVING.

Made in the USA

When measuring…

1. Be sure to check each scupper hole to be plugged. They can and do vary from hole to hole.

2. Measure to the nearest 1/8” at the section of the scupper hole where it is completely round and begins from a straight cylinder wall.

3. Select a plug size that has your scupper hole measurement somewhere near the middle of the taper range. For example if your scupper hole is 1-1/4”, you would want to select our 1-3/16” - 1-7/16”. This means that when the plug is installed, it will be approximately halfway in. If a larger plug is selected it will sit too high and be easy to be knocked out. If a smaller plug is selected it may sit lower but it may also not be large enough to press tightly in the scupper hole for a proper seal.